UGT-PCE430-2C/4C
Page 6
board down firmly.
6.
Replace the slot bracket’s holding screw to secure the card.
7.
Connect the SATA power OR Molex power from the
computer system power supply to this expansion card.
8.
Secure the computer cover; reconnect the power cord and
power ON the system.
9.
Once the computer is powered ON, proceed with the
installing the necessary drivers.
NOTE: If you are using Windows 8 or 8.1, your system will
automatically detect the device and install the necessary
drivers for you. You do not have to use the CD to start the
manual installation process.
2.2 Driver Installation
1.
Insert the provided CD into your disk drive. Browse to the
folder “UGT-PCE430-2C_4C” for the setup program.
2.
Run the Setup.exe program to start the installation program.
