UGT-IS100R
Page 7
RAID Arrays
RAID Arrays are setup in the 4+1 SATA II 300 IDE/PATA PCI-E
Combo Host Card w/ RAID & Port Multiplier ’s BIOS.
There are four configurations supported:
RAID
level/Type Configurations
Number of disks
needed
RAID 0
Disk Striping
2 or 3 or 4
RAID 1
Disk Mirroring
2
RAID 0+1
Disk Striping
+ Mirroring
4
JBOD
Disk Concatenation
2 or 3 or 4
RAID 0 (Striping)
1.
As the BIOS boots press
Ctrl+J
when prompted to enter the
RAID BIOS.
2.
At the next screen select
Create RAID Disk Drive
, press
Enter
.
3.
Enter RAID name, press
Enter
.
4.
Please use arrow keys
↑
and
↓
to
switch the RAID level to
0-Stripe
, then press
Enter
.
5.
Please use arrow keys
↑
and
↓
to
switch the disk, use the
