background image

 

6  

• With certain 1394 and USB2.0 devices (e.g. external hard discs) 

an icon with an arrow is displayed in the menu bar. Via this 

function the 1394 or USB2.0 device can be “separated” from

 

the PC and therefore tell the PC to close open files.

 

• Partitioning and formatting hard discs which are connected via

 

1394 and USB is effected via the computer administration with

 

Windows XP or Vista.

 

 

b) USB2.0

 

• USB2.0 ports naturally support USB1.1 also. Therefore, normal

 

“slow” USB devices can also be connected.

 

• Usually, you will not need any special “USB2.0 cables” for 

faultless USB2.0 operation. Conventional “normal” USB cables 

are quite sufficient, but they need to be shielded.

 

If transmission problems occur during operation of USB2.0 devices, 

you can try using a USB cable which has been tested in USB2.0 

operation (“USB2.0-certified”).

 

• USB operation is not possible in Windows safe mode. Therefore, 

USB keyboards and USB mice do not function (the BIOS of your 

motherboard / computer USB support might offer support for a USB 

keyboard or mouse).

 

c) 1394

 

• Both Firewire jacks on the front side are connected to each 

Summary of Contents for UGT-IH100









Reviews: