5
INSTALLATION INSTRUCTIONS FOR BUILT IN wine coolers: (UNDERBENCH
OR IN COLUMN)
FRONT VENTING wine coolers ONLY.
Reminder: The
V300-BG-ST-RH model is a free-standing only unit. If you attempt to install the
model as a built-in unit, you void the warranty.
1. “Built in” wine coolers ventilate at the front of the machine. They’re not designed for full integration behind a joinery
door.
2. Please follow the installation diagram when installing built-in wine coolers. Please follow the recommended
dimensions to avoid inadvertently affecting ventilation of your wine cooler.
3. Built-in wine coolers draw air from the right of the ventilation frame (VI20, VI35
,
VI26 from the rear) and expel through
the left of the ventilation frame under the front door.
4. “Built in” wine coolers have a power switch located on the control panel. You can control the electrical current flowing
through your wine cooler accordingly.
5. The wine cooler requires a standard 240 volt/10-amp power point.
6. The power cord is 2.0m in length and is fixed on the right side at the back when looking from the front of the cabinet.
7. As with most appliances today, the wine cooler has sensitive electronic components which are susceptible to damage
if exposed to lightning or faulty electricity. Therefore, you are advised to use a power surge protector to avoid problems
of this nature.
8. Air vents on the door must be provided for built-in wine coolers when a wooden door is installed at the front of your
cellar.
In hot climate zones, you require an air vent or grid with a minimum ventilation size of 200 mm x 40 mm. This ventilation
MUST be cut out at the top of the back partitioning OR at the top of either side of the partitioning so cool fresh air freely
flows into the 30 mm gap located at the rear of the cabinet.
The air vent or grid must not face heat generating appliances, such as ovens, or be exposed to areas without access to
cool fresh air.
Failing to comply with the above specifications could result in WARRANTY becoming void.
INSTALLATION DRAWINGS FOR BUILT-IN wine coolers: (UNDER BENCH OR
IN COLUMN)
FRONT VENTING wine coolers ONLY.
Note:
The appliance must be positioned so that the plug is accessible after installation.
