6
Connecting LED Lights To A Controller
Warning!
!
Make sure mains power is switched off.
Warning!
!
Do not connect or disconnect the controller with LED light under load.
!
Ensure the power cord and the controller cables do not touch any of the LED bars.
Using a daisy chain setup, a maximum of 50pcs LED lights can be connected to one controller.
The controller can dim the LED light from 0 to 100%.
• Connect the dimming cable to the dimming port on the first LED light.
• Use dimming cable (T-shape) to connect the dimming port of the following LED light.
• Repeat these steps to connect up to 50pcs LED lights.
!
Ensure the cord is not coiled and does not touch any hot surfaces.
!
Connect the cables according to local rules, safety regulations and electrical code.
!
Ensure external switching gear can cope with the inrush current of the LED fixture. Always use a
double pole contactor suitable for switching a capacitive load. Never use household timers to
switch the LED fixture!
V Q - G L M X 7 2 0 C
V Q - G L M X 7 2 0 C
T - S h a p e D i m m i n g
C o n n e c t i o n C a b l e
U P t o 5 0 p c s G L M X 7 2 0 C
i n o n e d a i s y s h a i n
c o n n e c t i o n
V D -1 0 0 0 - 1 0 V
D i m m i ng C on t r o l l e r
