4
Step 1
- Fix the Rubber Pulley Assembly to the Downrod with Bolt, Washer, Nut and
tighten them firmly, then insert the Clevis Pin.
IMPORTANT : Clevis Pin MUST be inserted to prevent Nut from loosening.
Installation Instruction
IMPORTANT : DO NOT CONNECT THIS REMOTE CONTROL CEILING FAN TO
DIMMER SWITCH OR REGULATOR.
Step 2 -
Remove the Bolt, Clevis, Nut, Washer and Rubber Pulley from the Downrod. Place
the Rubber Pulley onto the ceiling hook and fix back the Bolt, Clevis, Nut and Washer.
IMPORTANT : Clevis Pin MUST be insert to prevent nut from loosening.
Rubber
Pulley
Bolt
Clevis Pin
Washer
Nut
5
Installation Instruction
Step 3
- Remove the Safety Wire screw and spring washer from the Downrod.
Step 4
- Tie the Safety Wire across the hook as shown.
In the case of “J” Hook is being used.
