18
WWW.VANMAREQUIPMENT.COM
6. Adjust water flow by lifting solution valve upward or downward to fit different
scrubbing requirements (Figure 15).
7. When stopping, turn off the brush motor as well as the main power switch and lift
the brush and squeegee assembly.
During Operation
Warning:
DO NOT pick up any flammable materials or reactive metal in case of fire or
explosion.
FOR SAFETY:
Go slowly on inclines and slippery surfaces and wear non-slip shoes.
1. Keep the machine operating to avoid damages to the floor surface.
2. Clean the scrubbing area in advance to avoid scuff marks; if any, clean the squeegee
blade to remove any debris on it.
3. DO NOT operate the machine on inclines exceeding 5% .
4. Add a moderate quantity of defoamer to recovery tank to remove additional foam.
NOTE: Keep the foam away from sewage screen filter in the recovery tank in case of
motor failure.
5. A dual cleaning method is recommended when scrubbing heavily soiled area.
Battery Meter
Battery meter displays battery capacity. When the battery is fully charged, all the
indicators will be on and then go out in sequence form right to left.
NOTE:
To prolong battery life, charge them after
every use. It is best to stop scrubbing and charge
the battery cells when the left light is blinking.
Scrubbing operation will automatically shut off to
prevent the battery cells from running out. If
this happens, charge the battery cells immediately
(Figure 16).
(Figure 15)
(Figure 16)
Summary of Contents for VMS22T
Page 36: ...WWW VANMAREQUIPMENT COM...
