VanLab Mercedes Sprinter 144, Fittings Manual, Page: 14 / 37

Screw the batten to the floor
2
The Process
1
4
- You now need to screw each of the 20 batten to the
top face of the flooring sections. You can distinguish
what the top face of the floor is by the engraving. The
underneath face will be clear of any engravings.
- The batten locations are denoted by 2 ‘Crosses’ in a
rectangle (Reminder: see Page 6)
- To do this, place the batten down on the top face you
BUT screw from the bottom face of the flooring so the
screw goes through the flooring FIRST and then into
the batten.
- Once all the batten is secured to the 5 flooring
sections, the flooring can be transferred to the van.
- It is slotted into place as per the previous page. It slots
in place like a jigsaw!
For the flooring, screw batten in from the bottom face