1
2
3
VANGUARD GOLD MOBILE
EXTRAORAL SUCTION
25799 Jefferson Ave. Murrieta, CA 92562 ● 1-800-VANIMAN (826-4626) ● www.vaniman.com ● [email protected]
VANGUARD GOLD MOBILE REV1 06/20
Page 2
Replacement Parts
Fig. #
Description
Part Number
1
Caster Wheels
3140
2
Flex Hose - 3’
96001
2
Flex Hose - 1’
96002
3
Rectangular Nozzle
(5 pack)
96090
Not Shown HEPA Filter Cartridge
97016
Optional
Round Nozzle (5 pack) 96091
Not Shown Foot Remote/Bellows
1443
PACKING LIST
1 - Vanguard Gold Mobile
1 - Internal HEPA Filter
1 - Power Cord
1 - 4’ Flex Hose
4 - Caster Wheels
1 - Foot Remote/Bellows
Tools Needed: Wrench (1/2” or adjustable)
ASSEMBLY INSTRUCTIONS
1. Remove the four caster wheels from the bag packed with the Flex Hose. Lay the unit on its back
on top of several pieces of foam packaging to protect it. Screw the four caster wheels into the four
threaded holes in the bottom of the unit. Tighten them with a wrench.
2. Connect the Flex Hose kit to the inlet tube on the top of the unit. Adjust the Flex Hose to the desired
position.
3. Plug the removable power cord into the socket on the top of the unit. Plug the other end into a stan-
dard grounded wall socket. Connect the black foot remote tube to the black remote switch connector
on the unit; test by turning the power switch on or by pressing the foot remote. Located on the top of
the unit is the On/Off switch. Turn the unit on and adjust the amount of suction by turning the rotary
selector. The unit can be turned on and off by depressing the foot remote.
DISINFECTION INSTRUCTIONS
1. Using disinfectant, spray outside and inside of Flex Hose between sessions. Unit may remain on
during this step.
IMPORTANT SERVICE INFORMATION:
SAVE SHIPPING BOX AND FOAM FOR FUTURE
SERVICE. SHIPPING WITHOUT PROPER FOAM
MAY CAUSE DAMAGE TO UNIT
