Vanguard VMH26TPB Owner'S Operating & Installation Manual Download Page 23

111043-01B

For more information, visit www.desatech.com

For more information, visit www.desatech.com

23

23

TECHNICAL SERVICE

You may have further questions about installation, operation, or
troubleshooting. If so, contact DESA Heating Products’ Technical
Service Department at 1-866-672-6040. When calling, please have
your model and serial numbers of your heater ready.

You can also visit DESA Heating Products’ technical services web
site at 

www.desatech.com.

SERVICE HINTS

When Gas Pressure Is Too Low

• pilot will not stay lit

• burner will have delayed ignition

• fireplace will not produce specified heat

• propane/LP gas supply may be low (propane/LP only)

You may feel your gas pressure is too low. If so, contact your local
propane/LP or natural gas supplier.

REPLACEMENT PARTS

Note: 

Use only original replacement parts. This will protect your

warranty coverage for parts replaced under warranty.

PARTS UNDER WARRANTY

Contact authorized dealers of this product. If they can’t supply
original replacement part(s) call DESA Heating Products’ Techni-
cal Service Department at 1-866-672-6040 for referral information.

When calling DESA Heating Products, have ready

• your name

• your address

• model and serial numbers of your fireplace

• how fireplace was malfunctioning

• type of gas used (propane/LP or natural gas)

• purchase date

Usually, we will ask you to return the part to the factory.

PARTS NOT UNDER WARRANTY

Contact authorized dealers of this product. If they can’t supply original
replacement part(s) call DESA Heating Products at 1-866-672-6040
for referral information.

When calling DESA, have ready

• model number of your fireplace

• the replacement part number

SPECIFICATIONS

VMH26TPB

VMH26TNB

Btu (Variable)

14,000/26,000

14,000/26,000

Type Gas

Propane/LP Only

Natural Only

Ignition

Piezo

Piezo

Pressure Regulator Setting

8" W.C.

3" W.C.

Inlet Gas Pressure (in. of water) *

Maximum

14"

10.5"

Minimum

11"

5"

Dimensions, Inches (H x W x D)

Fireplace (including hood and screws)

25 

7

/

8

 

x 26 

13

/

16

 x 9 

3

/

8

25 

7

/

8

 

x 26 

13

/

16

 x 9 

3

/

8

Carton

32 

5

/

8

 x 27 

3

/

16

 x 11 

5

/

8

32 

5

/

8

 x 27 

3

/

16

 x 11 

5

/

8

Weight, pounds

Fireplace

44 

1

/

2

 lbs.

44 

1

/

2

 lbs.

Shipping

48 lbs.

48 lbs.

* For purposes of input adjustment

SPECIFICATIONS

SERVICE HINTS

TECHNICAL SERVICE

REPLACEMENT PARTS

Summary of Contents for VMH26TPB































Reviews: