REV 1.5
TRM-20 AND TRM-40 USER’S MANUAL
51
d.
The following screen will be displayed:
Set the LTC or Voltage Regulator to the lowest position either manually or by pressing
and holding the LTC
[LOWER]
button. Press any key to continue.
e.
The following warning screen will be displayed:
Press the
[START]
key to run the test.
f.
The following screen will be displayed momentarily:
After the TRM has finished its internal calibration, the following screen will be displayed:
When the TRM has determined that the resistance reading is stable, the following
screen will be displayed:
*XFMR CHARGING*
please wait...
I = 1.01 AMPS
** XFMR ENERGIZED! **
calibrating
please wait...
DYNAMIC LTC TEST
"START" TO RUN TEST
OR
"STOP" TO ABORT
SET LTC/VREG To
LOWEST TAP POSITION.
PRESS
ANY KEY WHEN READY
