manualshive.com logo in svg

Vanguard Instruments CT-3500 S2, User Manual, Page: 41 / 53

Share
Download
Vanguard Instruments CT-3500 S2 User Manual Download Page 41

REV 1.1

 

CT-3500 S2 USER’S MANUAL

 

 

37

 

 

 

 

3.6.4.  Restoring a Test Shot From a USB Flash Drive 

Use the steps below to restore a test record from a USB Flash drive to the CT-3500 S2’s working 

memory: 

a.

 

Make sure the USB Flash drive containing the test record(s) is inserted in the CT-3500 

S2’s USB Flash drive port (“USB MEM” port). Then start from the “START-UP” menu: 

 

Press the 

[3]

 key (

SETUP

). 

b.

 

The following screen will be displayed: 

 

Press the 

[2]

 key (

SAVE / RESTORE

) 

c.

 

The following screen will be displayed: 

 

Press the 

[2]

 key (

RESTORE SHOT

). 

1.

 

SAVE SHOT 

2.

 

RESTORE SHOT 

3.

 

SHOT DIRECTORY 

4.

 

ERASE SHOT 

5.

 

COPY TO THUMB DRIVE 

 
 

1.

 

SHOT DESCRIPTION 

2.

 

SAVE / RESTORE 

3.

 

SET 50/60 HZ 

4.

 

SET DATE & TIME 

 
 
 

1.

 

TIME BRKR  05/16/12 

2.

 

GET RSLT   09:55:55 

3.

 

SETUP 

4.

 

DIAGNOSTICS 

 
 
 

Summary of Contents for CT-3500 S2






















































Reviews:

No comments