Accu-Trans
Operating Procedures
13
ENTER key and go to the next step. The
STATION screen will then be displayed.
b)
Enter characters for naming the station
where the transformer to be tested is located.
When all the characters are selected or
identifying the station, press ENTER key
and go to the next step. The CIRCUIT
screen displays.
c)
Enter all characters needed to identify
the circuit name, then press ENTER key and
go to the next step. The manufacturer screen
displays.
d)
Enter all characters needed to identify
the manufacturer of the transformer being
tested, then press ENTER key and go to the
next step. The MODEL screen displays.
e)
Enter the characters of the transformer’s
model number, then press ENTER key and
go to the next step. The SERIAL NUMBER
screen displays.
f)
Enter the alpha-numeric characters
needed to identify the serial number, then
press ENTER key and go to the next step.
The KVA RATING screen displays.
g)
Enter the numbers to identify the KVA
rating for the transformer being tested, then
press ENTER key and go to the next step.
The OPERTOR screen displays.
h)
Enter the characters needed to identify
the operator who is performing the tests.
This completes entries for the transformer
identification data. Press ENTER key to
enter the selected data: the program returns
to the START-UP MENU.
6.3.2 Review Test Records Procedure
This procedure describes steps to review a
test record residing in Accu-Trans
working memory. The user can view the
record on the LCD display or from a thermal
printout.
STATION:
CIRCUIT:
MANUFACTURER:
MODEL:
SERIAL NUMBER:
KVA RATING:
OPERATOR:
Summary of Contents for ACCU-TRANS II Series
Page 2: ......
Page 4: ......
Page 13: ...Accu Trans Operating Procedures 9 Figure 4 0 Summary of Step by Step Accu Trans Operation...
Page 27: ......
