VG-MH380 380W Spot Beam Wash Moving Head Light User Manual VG-MH380 380W Spot Beam Wash Moving Head Light User Manual
gobo,1gobo+cloud effect.
·
Equips colorful touch screen control panel, easy operate.
Ⅲ
SAFETY INFORMATION
※
Important
Every person involved with the installation, operation and maintenance of this device has to
be qualified and follow the instructions of this manual. Manufacturer will not with
responsibility for those operations which are not according to this Instruction.
Verify that the voltage matches the rated voltage.
When the voltage is 110V , Do not connect more than 10 lightings in total to AC mains
power in one interconnected daisy chain
When the voltage is 220V , Do not connect more than 20 lightings in total to AC mains
power in one interconnected daisy chain
Before using the fixture, check that all power distribution equipment and cables are in
perfect condition and rated for the current requirements of all connected devices.
Always ground (earth) the fixture electrically.
Avoiding hit the Light when you are move or install the light.
The minimum distance between light-output and the illuminated surface must be more
than 0.5 meters. Keep all combustible materials (for example fabric, wood, paper) at least
0.2 meters away from the fixture.
Do not expose the fixture to rain or moisture.
Avoid looking directly into the light source (especially those who suffer from epileptic fits)
Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures higher
than this.
The Maximum surface temperature is 50°C
When suspending the fixture above ground level, verify that the structure can hold at least
10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
Ⅳ
DIMENSION
unit: mm
Ⅴ
INSTALLATION AND SET UP
P
OWER
S
UPPLY
Before plugging your unit in, be sure the source voltage in your area matches the required
voltage for unit, The model
is Auto power supply, It is workable in 100-250V/50~60Hz.
Please make sure your unit voltage matches the wall outlet voltage before attempting to
operate you fixture.
C
ONNECTION TO THE MAINS
For protection from electric shock, the fixture must be earthed!
Install a suitable plug on the power cord, note that the cores in the power cord are colored
according to the following table. The earth has to be connected!
If you have any doubts about proper installation, consult a qualified electrician.
02
03