VG-ERS200A 200W LED Profile Spot Light User Manual VG-ERS200A 200W LED Profile Spot Light User Manual
Please use qualified safety-rope, which can hold at least 10times the weight of the
fixture. You must only use only safety-ropes with quick links with screw cap.
Pull the safety-rope through the hole on the bottom of the base and over the trussing
system etc. Insert the end in the quick link and tighten the fixation screw. A safety
rope which already hold the strain of a crash or which already hold the strain of a
crash or which is defective must not be used again
2.
Dmx512 Connection
Please use xlr-xlr wires connect the dmx out put of the controller with the dmx input of
the first device, and connect the DMX output of the first device with the dmx input of
the second device, always connect one output with the input of the next device until
all devices are connected.
Please use qualified xlr-xlr dmx cables
3.
Connection with mains
The person involved with the power connection must be qualified, and has the
electrical engineering certificate.
Connect the device to the mains with the power plug.
The earth has to be connected.
Power consumption 100w, input power supply ac100v-240v, 50/60HZ.
4.
The use of color mains
Take out the color frame. Loose the screws insert the color and lock the screws again
Insert the color in the slot
07
06
