VG-AB2-QL 200W LED Audience Blinder Light User Manual VG-AB2-QL 200W LED Audience Blinder Light User Manual
2). This product left the place of manufacture in perfect condition. In order to maintain this
condition and for safe operation, the user must always follow the instructions and safety
warnings described in this user manual;
3). Manufacturer will not with responsibility for those operations not according to this
Instruction.
Ⅲ
. OPERATION ATTENTION
·
Do not connect power cable of other electric products with this unit;
·
Do not connect DMX512 Signal cable of other electric products with this unit;
·
Always make sure that you are connecting to the proper voltage, and that the line voltage
you are connecting to is not higher than that stated on the decal or rear panel of the fixture;
·
Always ground (earth) the fixture electrically;
·
During long periods of non-use, disconnect the unit’s main power;
·
Do not attempt to operate this unit if the power cord has been frayed or broken;
·
There are no user serviceable parts inside the unit. Do not open the housing or attempt
any repairs yourself;
·
Maximum ambient temperature (Ta) is 35°C. Do not operate fixture at temperatures
higher than this;
·
The surface temperature of the light can reach to 65° C, cool down at least before you
operate the light;
·
The minimum distance between light-output and the illuminated surface must be more
than 1 meters. Keep all combustible materials (for example fabric, wood, paper) at least 0.5
meters away from the fixture;
·
Avoid looking directly into the light source (especially those who suffer from epileptic
fits);
·
Always mount this unit in safe and stable matter;
·
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices;
·
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable;
·
Block access below the work area whenever installing or removing the fixture.
·
Avoiding hit the Light when you are move or install the light;
·
If the exterior cord of the fixture is damaged, it must be replaced by manufactory, agent
or a qualified technician.
Ⅳ
INSTALLATION INSTRUCTION
Before plug-in the power, please make sure the voltage, frequency of the light are
correspond to the power. And ensure the grounding line of the light working reliable.
You can distinguish the different power cords as below:
Color of the Power Cord
Connection
Brown
Live line
Blue
Neutral/Null line
Yellow green
Earth line
1. Signal Connection
This light provide 3 pins cannon seats, Pin1 for signal ground, Pin2 for signal-, Pin3 for
.
DMX-IN DMX-OUT
The controller, light and light will be connected by 3 pins signal cables one by one.
-6-
-6-
03
02
