VG-LPI1818H LED Indoor Par Light User Manual VG-LPI1818H LED Indoor Par Light User Manual
approved means of secondary attachment such as a safety cable;
·
Block access below the work area whenever installing or removing the fixture.
·
Avoiding hit the Light when you are move or install the light;
·
If the exterior cord of the fixture is damaged, it must be replaced by manufactory, agent or a
qualified technician.
Ⅳ
INSTALLATION INSTRUCTION
Before plug-in the power, please make sure the voltage, frequency of the light are
correspond to the power. And ensure the grounding line of the light working reliable.
You can distinguish the different power cords as below:
Color of the Power Cord
Connection
Brown
Live line
Blue
Neutral/Null line
Yellow green
Earth line
1. Signal Connection
This light provide 3 pins cannon seats, Pin1 for signal ground, Pin2 for signal-, Pin3 for .
DMX-IN DMX-OUT
The controller, light and light will be connected by 3 pins signal cables one by one.
You can connect the output of the controller with input of the first light, and connect the output
of the first light with the input of the second light in the DMX control mode, and so on one by
one. And please connect the output of the last light with the terminal seat. You can don’t need
the controller and circuit terminal seat in the master/slave controller mode.
You can use one 120Ω& 0.25W resistance to insert into and weld the pin2 & pin3 of one male
cannon plug to make the circuit terminal seat. The circuit terminal seat can avoid DMX-512
signal reflex and interference effectively.
If the output of your controller is using 5 pins cannon seat, please use 5pins into 3pins signal
change cable.
2. Installation Method
The light can be placed on the solid plane places, then loosen the screw on both sides of the
handles to adjust the right project angle. Please pay attention the places are
non-flammable.
Install the clamp into the hole of the handle, and hang it on the truss then. You can
adjust the right project angle through the screw of the both sides of the light. It’s
-6-
-6-
DMX IN DMX OUT DMX IN DMX OUT DMX IN DMX OUT
DMX Controller
Circuit Terminal Seat
-04
03
