VG-4HS432D 4 Heads LED Moving Head Beam Light User Manual VG-4HS432D 4 Heads LED Moving Head Beam Light User Manual
INDEX
Ⅰ
SAFETY INSTRUCTION ................................................................ 01
Ⅱ
PRODUCT FEATURES ................................................................... 02
Ⅲ
FUNCTION DESCRIPTION ........................................................... 03
Ⅳ
CONTROL PANEL ......................................................................... 04
Ⅴ
FIXTURES INSTALLATION ........................................................... 04
Ⅵ
CONTROL PANEL MAIN FUNCTION .............................................. 06
Ⅶ
DMX CHANNEL CHART ................................................................. 07
Ⅷ
PRODUCT STATEMENT ................................................................ 13
I. SAFETY INSTRUCTION
1. When opening the packing, take all accessories out, and remove the product to a
horizontal table for good operation. First check whether the accessories are complete, then
check carefully whether the whole product has no damage. If there is any damage, please
keep it original and return to the factory.
2. AC Power: Check whether the local power supply is accordance with the requirements of
the product rated voltage.
3. The product is only suitable for indoor working environment. The product should keep
dry, keep away from wet, overheat or dusty environment. Don't come into contact with
water and other liquids to prevent or reduce the risk of electric shock or fire.
4. Please do not install the light directly on the surface of the combustible substance.
5. The people who install, operate and maintain of light professional certificate required.
6. When there are faults of the product, please stop using it immediately. Don't try to repair,
please contact the nearest authorized technical assistance center, if the parts damage,
always use the same type of parts replaced.
7. Don't touch any electrical wiring in the process of operation to prevent the risk of electric
shock.
8. To make sure the light working environment temperature, the highest do not exceed
40
℃，
the lowest do not exceed - 20
℃
.
9. The light is design according to the type of electric shock protection. The light should be
01
