When the voltage is 110V, Do not connect more than 10 lightings in total to AC mains power
in one interconnected daisy chain.
When the voltage is 220V, Do not connect more than 20 lightings in total to AC mains power
in one interconnected daisy chain.
P
HYSICAL
I
NSTALLATION
This lighting can be placed on a horizontal surface such as a stage or clamped to a truss or
similar rigging structure in any orientation using a rigging clamp.
When suspending the fixture above ground level, verify that the structure can hold at least
10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
H
OW TO
I
NSTALL A
C
LAMP TO THE
L
IGHTING
1.
Choose a clamp with M10 bolt, the bolt is 30~40cm.
2.
Screw a M10 nut to the clamp bolt, use a spanner to tighten it.
3.
Install the clamp into the base of the fixture as below picture. Using a spanner to make
the clamp, nut, spring washer, flat washer tightly together.
Ⅴ
DMX PROTOCOL
This lighting has five Channels modes, including:
-05-
Summary of Contents for SWIFT 121
Page 1: ......
