vanEssen Diver-Link, Quick Reference Manual

Page: 1 / 4

© October 2021 Van Essen Instruments. All rights reserved. www.vanessen.com
Diver-Link Preparation and Setup
Introduction
This guide outlines how to setup your remote monitoring project using Diver-HUB, Diver-Office, Diver-
Link and Divers.
The following icons are used:
Warning
Tip/suggestion
Reference to a manual
The setup consists of 11 steps:
Step 1 Create an Account ...................................................................................................................... 2
Step 2 Login ........................................................................................................................................... 2
Step 3 Create a Project .......................................................................................................................... 2
Step 4 Setup the Project ....................................................................................................................... 2
Step 5 Configure the Diver-Link Hardware ........................................................................................... 3
Step 6 Configure the Diver-Link in Diver-HUB ...................................................................................... 3
Step 7 Import Diver-HUB Project in Diver-Office ................................................................................. 3
Step 8 Program the Divers .................................................................................................................... 3
Step 9 Connect the Equipment ............................................................................................................. 4
Step 10 Activate the Diver-Link ............................................................................................................. 4
Step 11 Check the Hardware Information in Diver-HUB ...................................................................... 4