V&P Scientific, Inc.
2
Technical Note 366C
SET-UP
CONNECTING PARTS OF THE SpinVessel® SYSTEM
Power and Controller Connections
1.
Place Motor Unit on a sturdy lab bench, table or robotic work station.
2.
Controller and computer can be placed at a distance from the Motor Unit.
Controller Cable is 6 feet long.
3.
Connect Power Cord from Power Supply to an outlet.
4.
Connect Power Cable from Power Supply to Controller.
Warning: Do not plug Controller in while power is on. Ensure that the Power
Switch is in the off position (“0” is down). Always have Controller plugged in
before powering up.
5.
Connect Controller Cable from the Motor Unit to the Controller.
6.
Connect the USB Cable from the Controller to the computer.
Power
Switch
Power Cord
Receptacle
USB
Cable Connector
Controller
Cable
Receptacle
Power Cord
Controller
Cable
Controller
Motor Unit
Power
Supply
Power
Cable
USB
Cable
Controller
:
Spin Base
Parts of the System:
