manualshive.com logo in svg

VANDERHALL Laguna, User Manual, Page: 27 / 115

Share
Download
VANDERHALL Laguna User Manual Download Page 27

27 

 

Warning

 

You can be seriously injured, or even 
killed, by not wearing your safety belt 
properly.  

 

Never allow the lap or 
shoulder belt to become loose 
or twisted. 

 

Never wear the shoulder belt 
under both arms or behind 
your back. 

 

Securing Lap-Shoulder Belt 

Both Driver and Passenger seats have a lap-
shoulder belt. The following instructions 
explain how to wear a lap-shoulder belt 
properly. 

1.

 

Sit up straight 

2.

 

Grasp the latch plate and pull the 
belt across your body. Do not 
allow the belt to become twisted 

 

 

3.

 

If you pull rapidly the belt may 
lock. If this occurs allow the belt 
to retract slightly then continue 
pulling the belt across your body 
more slowly. 

4.

 

Push the latch plate in to the 
buckle until a click is heard 

5.

 

Pull on the latch plate to ensure it 
is secure. 

6.

 

To make the Lap Belt tight, pull 
up on the shoulder belt 

Unlatching Lap and Shoulder Belt 

 
To unlatch the belt, press the red button on 
the buckle, the belt will return to its stowed 
position. 

 

Summary of Contents for Laguna




















































































































Reviews:

No comments