Vanderbilt Eventys EX4, Quick Start Manual

Page: 5 / 160

© Vanderbilt 2016 5
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
●
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
●
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
Please refer to technical specifications for detailed information.
●
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240 VAC
or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information.
●
Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.
●
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please
contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•
Ensure unit is installed in a well-ventilated, dust-free environment.
•
Unit is designed for indoor use only.
•
Keep all liquids away from the device.
•
Ensure environmental conditions meet factory specifications.
•
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause
damage to the sensitive electronics within the unit.
•
Use the device in conjunction with an UPS if possible.
•
Power down the unit before connecting and disconnecting accessories and peripherals.
•
A factory recommended HDD should be used for this device.
•
Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type
only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
Power Supply
•
Ensure that the AC power supply is stable and within the rated voltage of the unit. Use an uninterrupted power supply
(UPS) to ensure a continuous function of the unit in the event of power dips on the AC mains supply. Suitable UPS
devices can be ordered within the local IT market, e.g. APC SMT2200I or others.
•
Eventys EX4 NVR (CRDN0410-PA): Ensure that the total length of the power cable is less than 3m.
Warnings Follow these
safeguards to prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.