Vanderbilt CD30 Codoor, Configuration Manual

Page: 10 / 48

Change Administrator code
10
Vanderbilt International (IRL) Ltd.
05.2016
8 Change Administrator code
8.1 Present Administrator code is known
NOTE
 The Administrator code cannot be the same as the code 112186 to erase the memory.
See section 11 Erase memory .

If you are in administrator mode and don’t press a key the device will automatically leave the
administrator mode after 30 seconds.
CD30 is delivered with the default Administrator code set as 112233.
1. Press B.

2. Enter the 6-digit Administrator code.

3. Press A27.
 The buzzer sounds a confirm tune.

4. Enter a new 6-digit Administrator code.
 The buzzer sounds a confirm tune.
5. Verify by entering the same Administrator code again.
 CD30 exits at the Administrator mode.

6. Make a note of the Administrator code.