When the highest accuracy is required, it is advisable to
keep on measuring for a moment after the reading is
almost steady to insure the probe has fully stabilized
and reached equilibrium with the object.
NOTE:
The probe tip must be sterilized before and between
measurements of food samples
to avoid cross
contamination.
5. Auto power off time is set 8 min., it will enter into Sleep
status if there is no action to any key in 8 min. after
power on, The set time will be re-calculated if any key is
pressed.
Press
“
℃
/
℉
”
key to power on will cancel the auto power off
function.
5. CLEANING INSTRUCTIONS
The meter may be wiped down with a wet sponge or cloth
using a mild water based detergent or anti-bacterial soap
and rinsed under a gentle stream of cold water.
NOTE:
This unit is not designed for complete submersion or
washing in automated dishwashers.
6. BATTERY REPLACEMENT
Use the following procedure:
When the battery voltage drop below proper operation
range the
symbol will appear on the LCD display
and the battery need to be replaced.
Press the battery cover and towards arrowhead direction
to open the battery cover.
Replace the battery with two new 1.5V batteries (AG13).
Replace the battery cover.
