9
The PA66MK2 can work with speakers that are 4-8 Ohm. There are two modes
that can be set for different setups: Stereo or Bridge. An 8 Ohm speaker can
only be used when in Bridge mode. To choose between modes, use the mode
switch to determine modes for each zone (Number 2 Panel Descriptions, page
5)
Once you have properly identified the desired mode, strip about ¼” of
insulation and twist the copper strands. Connect the speaker wire to there
screw down terminal as indicated on the amp. To loosen the terminal turn
counterclockwise and to tighten the terminal turn clockwise. For better
quality, we recommend used 12-14 AWG stranded copper speaker wire.
CONNECTING THE SPEAKERS
