www.vanco1.com
800-626-6445
9
CONNECT AND OPERATE
1. Connect sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. on
the unit with HDMI cable(s). Insert and extract cables carefully with the power switched off. Connecting and
disconnecting while the unit is powered can result in damage to circuitry.
2. If you are routing digital or analog audio to an amplifier or audio video receiver, do so by either connecting a
3.5mm stereo cable OR use the provided optical audio adapter with an optical audio cable in the audio out port of
the switch. This is necessary when trying to utilize the ARC feature of the switch.
NOTE: The ARC and CEC functions MUST capable and be enabled within your display settings in order to
use ARC
3. Connect the HDMI outputs that go to the displays
4. Connect the provided IR receiver to the IR IN port on the switch to control the switch via IR
5. OPTIONAL: Connect an RS-232 cable from the “RS232” port on the switch to a computer or 3rd party controller
6. Connect the provided DC 5V power supply
7. Connect the power supply to an available electrical outlet and power on the device.
NOTE: ARC, EDID, and switching mode changes can be made when the unit is powered ON. Vanco High Speed HDMI
cables are strongly recommended for use with this product to ensure best results. Incorrect placement of IR Receiver
may result in the failure of the unit. Please check carefully before plugging in the IR accessories into the respective IR
ports.