Vanco HDEXWIR, Manual

Page: 8 / 12

www.vanco1.com 800-626-6445
8
Connect the Transmitter to the source, and the Receiver to the display, power on both the Transmitter and
Receiver units. Press the PAIR button on the transmitter and hold for three seconds.Next, press and hold
the PAIR button on the receiver and hold for three seconds. The LINK LEDs on both units will blink rapidly. If
the LINK LED of the Receiver illuminates solid, and the LINK LED of the Transmitter blinks rapidly meaning
the pairing is successful. Ensure the HDMI source is outputting signal, when there is signal transmission
between the Transmitter and Receiver, the LINK LEDs on both units will blink slowly. Alternatively you can also
press and hold the PAIR buttons simultaneously on the transmitter and receiver simultaneously with the help
of another person or by having both the transmitter and receiver local to each other before installing in final
installation location.
Transmitter LINK
LED Status (Green
Receiver LINK LED Status
(Green)
Description
Fast Blinking Fast Blinking Pairing Mode
Fast Blinking Solid Illumination Successful Pairing
Off Off Unsuccessful pairing or n signal
tranmission. Ensure HDMI source is
outputting signal
Fast Blinking Slow Blinking Paired and normal operation with HDMI
signal transmittion
PAIRING INSTRUCTIONS