www.vanco1.com
800.626.6445
14
Manual Switching
When the switcher is in the manual switching mode, press the SELECT AUTO/3s button repeatedly to cycle
through the four video inputs sequentially, the corresponding source LED illuminates green for the selected
input.
Auto Switching
Press and hold the SELECT AUTO/3s button for three seconds to enable auto-switching, the AUTO LED will
illuminate green. When in the AUTO mode, the switcher will switch according to the following rules:
•
The switcher will switch to the first active input starting at AirPlay/Miracast to PC3
•
New input: The switcher will automatically select the new input once detecting a new input signal
•
Reboot: If power is restored to the switcher, it will automatically reconnect to the input selected before
shutdown
•
Source removed: When an active source is removed, the switcher will switch to the first active input
starting at AirPlay/Miracast input to PC3
•
In auto mode, the input source also can be switched by the manual switching steps
•
Press and hold the SELECT AUTO/3s button for three seconds to exit AUTO mode, note that the input
source will not be changed
•
Note that the AirPlay/Miracast is not an active input when there is no screen sharing device connection
Display Control
With this feature, the display can be turned on/off via CEC. The display must have CEC functionality for this
feature to work. Ensure the CEC feature is enabled on the display and that the proper HDMI input is utilized.
•
Manual Control: Press the DISPLAY ON/OFF buttons on the front panel to simultaneously send RS232
and CEC commands to turn on/off the display device
•
Auto Control: When detecting a video input signal (5V or TMDS), automatically sends CEC and RS232
commands to turn on the display device. When not detecting any video signal within the setting time
(default 10mins), automatically sends RS232 and CEC commands to turn off the display device
FRONT PANEL CONTROL
