www.vanco1.com
800.626.6445
7
WIDEBAND IR (30-60 KHz)
IR BLASTER (TX)
To control the source: Plug IR Blaster into IR TX port of transmitter unit; place blaster in front of the IR eye of
the source.
IR RECEIVER (RX)
To control the source: Plug IR Receiver into IR RX port of receiver unit; place receiver at or near display.
DISPLAY MODES
The quad multi-viewer has 3 display modes.
MODE1: The Quad-Viewer combines the four HD inputs to the same size and display on one screen. By
switching the input button on front panel or IR remote, the HDMI output audio will correspond to the selected
input source.
MODE2: The PIP Multi-Viewer combines the four HD inputs to one larger main view and three smaller picture-
in-picture displays on one screen. By switching the input button on front panel or IR remote, the bigger picture
will correspond to the selected input source. The HDMI output audio follow the main picture input.
MODE3: The will separately display each individual HD input and seamlessly switch between sources.