www.vanco1.com
800.626.6445
5
PANEL DESCRIPTIONS
1
2
3
5
6
7
1. Power LED: Illuminates when the unit is powered on
2. Input LED: Illuminates when sources are connected and sending signal
3. Loop-out LED: Illuminates when connected to HDMI displays or additional EVSP24VW units
4. Output LED: Illuminates when HDMI displays are connected and powered on
1. HDMI Inputs: Connect HDMI sources (sources with conversion to HDMI may cause issues)
2. Loop-out ports: Connect HDMI displays to split out source signals, or connect additional EVSP24VW units
to daisy-chain for larger video wall applications (using output “B/MAIN”)
3. HDMI Outputs: Connect HDMI displays
4. 12V/3A: Connect the included power adapter
5. Ground
6. Audio Outputs:
• TOSLINK output for both digital and analog output
- 3.5mm connection for stereo LR output
- Digital Optical using the included 3.5mm to SPDIF adapter
• BALANCED OUT: Connected the included 5-pin phoenix connector, 20Hz ~ 20kHz, 1.5Vrms max
7. Service: Firmware update port, any firmware updates will be available on the product page under the
“Downloads” tab on www.vanco1.com
8. Control:
• RS232: Loop out RS232-CTL control command
• RS232-CTL: External RS232 control
• Baud Rate: 57600
• Data Bits: 8
• Parity: None
• Stop Bits: 1
• LAN: Network port for TCP/IP control. Connect to an active Ethernet link with an RJ45 cable for IP control
1
2
3
4
4
8
