www.vanco1.com
800.626.6445
7
EDID
EDID management helps the distribution and routing of signals from the source at the resolution of the first
detected display (detecting from output 1~2).
For example: when output 1 connects with a 1080p display, 4K HDMI Splitter 1x2 will select 1080p as output
resolution and distribute 1080p signal to displays connected to output 1~2.
Note: If the display connected to output 2 don’t support 1080p signal, there will be no output on the display.
FIRMWARE UPGRADE
This product uses an USB port for online firmware upgrade. Follow these steps to upgrade firmware:
Step 1: Copy the latest upgrade file (.hex) to PC from the DOWNLOADS tab of the product page
Step 2: Connect the USB ports of the 4K HDMI Splitter 1x2 and the PC via USB cable.
Step 3: Launch the upgrade software by double-click the icon of EPFlash.exe, it will enter the upgrade
interface shown as below:
Step 4: Select the right port number in the dropdown list of PORT, and click OpenFile to load the upgrade file.
Click Start to start firmware upgrading.
