www.vanco1.com
800.626.6445
6
1. POWER LED: Illuminates red when powered on either by PoC or connected power supply
2. ARC Mode: To enable or disable ARC, press the ARC button with a paperclip (paperclip marking on front
panel), the ARC LED will illuminate blue when activated
3. ARC Audio In: Connect digital optical audio from the display (if the display has a digital optical audio output
and does not feature an HDMI ARC port)
•
If the display features ARC, ensure the ARC functionality is active within the display settings; audio will
then be broken out at the matrix unit via the corresponding digital optical outputs (on the Evolution PRO
matrix units only)
4. FW: Micro-USB port for firmware upgrade; any available firmware updates will be located on the product
page for this part # on www.vanco1.com, under the “downloads” tab
5. HDMI OUT: Connect an HDMI display
6. Digital Optical Audio Breakout: Connect to a soundbar, amplifier, distributed audio system, etc. to extract
audio via digital optical audio (ARC must be disabled for output to be active)
7. IR IN: Connect the compatible IR receiver to send IR commands to the matrix unit location for source
control
8. IR OUT: Connect the compatible IR transmitter to send IR commands to the EVRXDSC for display control
from the matrix unit location
9. RS232: Connect the included 3-pin terminal block for RS-232 control device for 3rd party integration
10. HDBT IN: Connect a single Cat6 (home-run cable strongly recommended) to the matrix unit
•
The LINK LED illuminates when there is a link between the matrix unit and the receiver. The HDCP LED
illuminates when the video contains HDCP content
11. DC 24V: Optional, connect a power supply for redundant power, the EVRXDSC features PoC and will
receive power from the Evolution EVMX4X3, EVMX8X6, EVMX44PRO, or EVMX88PRO matrix units
PANEL DESCRIPTIONS
1
2
3
4
5
6
7
8
9
10
11
