manualshive.com logo in svg

Vanco Evolution Evoskillz, Manual

Share
Download
Vanco Evolution Evoskillz Manual Download Page 6

www.vanco1.com

800.626.6445

6

CONNECT AND OPERATE

1.   With power off, connect an HDMI source to the HDMI INPUT of the EVOSKILLZ unit using an HDMI cable
2.   Connect an HDMI display to the HDMI OUTPUT using a HDMI cable
3.   Connect an analog audio source to the 3.5mm Stereo IN port 
4.   For a manual set up, adjust the Source Sensitivity (db) dial and Audio Timeout Dial
 

a. Turn on the devices and test. Please note that different devices may require different    

 

adjustments to work properly. Settings are able to be changed with all devices powered on

 

b. Also note for more consistent results, it is best to have the analog audio source set to a FIXED  

 

output level to ensure audio is able to be switched without issues

5.   For software setup, connect the provided Micro USB cable to the device and the USB A end into a 
computer
6.   Install the software from the provided disc or download it from the website at www.vanco1.com
7.   Open the software

HDMI Source

HDMI

Stereo Audio Cable

Analog Audio/Voice 

Control Source

HDTV

HDMI

Summary of Contents for Evolution Evoskillz













Reviews:

No comments

Brands by name

Popular brands

Load more brands