background image

www.vanco1.com

800.626.6445

10

LIMITED WARRANTY

With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser that the equipment 
it manufactures or sells will be free from defects in materials and workmanship for a period of two years from 
the date of purchase. Should this product, in Vanco’s opinion, prove defective within this warranty period, 
Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become 
the property of Vanco. This warranty does not apply to those products which have been damaged due to 
accident, unauthorized alterations, improper repair, modifications, inadequate maintenance and care, or use in 
any manner for which the product was not originally intended. 
Items integrated into Vanco products that are made by other manufacturers, notably computer hard 
drives and liquid crystal display panels, are limited to the term of the warranty offered by the respective 
manufacturers. Such specific warranties are available upon request to Vanco. A surge protector, power 
conditioner unit, or an uninterruptible power supply must be installed in the electrical circuit to protect against 
power surges. 
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales 
invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco 
regarding warranty repair or replacement.

SAFETY AND NOTICE
The EVOIPLITE has been tested for conformance to safety regulations and requirements, and has been 
certified for EVOIPLITE should be used with care. Please read and follow the safety instructions to protect 
yourself from possible injury and to minimize the risk of damage to the unit.

• 

Follow all instructions and warnings marked on this unit

• 

Do not attempt to service this unit yourself, except where explained in this manual

• 

Provide proper ventilation and air circulation and do not use near water

• 

Keep objects that might damage the device and assure that the placement of this unit is on a stable 
surface

• 

Use only the power adapter and power cords and connection cables designed for this unit

• 

Do not use liquid or aerosol cleaners to clean this unit

• 

Always unplug the power to the device before cleaning

Summary of Contents for Evolution EVOIPLITE













Reviews: