www.vanco1.com
800.626.6445
7
OPERATION CONTROL - IR REMOTE CONTROL
OUTPUT A: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT A, the LED will indicate the
corresponding input source.
OUTPUT B: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT B, the LED will indicate the
corresponding input source.
OPERATION CONTROL – SETTING EDID VIA IR REMOTE
To utilize EDID operation via IR Remote, set EDID Dip Switch on front panel to “1 1 1 1” as shown in the EDID
Settings table.
The EDID Index section on the remote has 15 different EDID settings, 1-12 are static EDID settings (refer
to the EDID table shown in EDID Dip Switch Adjustment). “Out A” and “Out B” is collect/copy the EDID
information from the display connected from either Output A or Output B. “Auto” is to automatically set EDID
from both connected displays.
The INPUT section has a selection for each source/input, simply select from the EDID Index section and select
which input to copy EDID information to.
