www.vanco1.com
800.626.6445
7
CONNECTION DIAGRAM
CONNECT AND OPERATE
1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc.
to the HDMI input of the Transmitting unit
2. Connect a display such as an HDTV or HD Projector or monitor to the HDMI output on the Receiving unit
3. Connect a single Category 6/6A/7 up to 230ft/70m to the RJ45 output of the Transmitting unit, and the
other end to the RJ45 input of the Receiving unit. A home-run category cable is strongly recommended,
any coupling point results in signal loss that could affect the video signal
4. Connect the USB port on the Transmitting Unit to the source; Connect the USB connection(s) on the
Receiving Unit to a keyboard, mouse, touchscreen monitor, etc.
5. OPTIONAL: Connect an amplifier, soundbar, or audio distribution component to the S/PDIF digital optical
output on the Receiving unit
6. For power, plug in either the Transmitting unit or Receiving unit with the included power supply, opposite
unit will not have to be plugged in as it features Power over Ethernet (PoE)
7. Power on each device in the same sequence (receiver and transmitter will already be powered when either
unit is plugged in.)
