
www.vanco1.com
800.626.6445
6
1. Reset button: Reboots the receiver
2. Cat6 Input: Connect a single Cat6 with other end of cable connected to the splitter unit (home-run cabling
strongly recommended without any couplings, punch-downs, or patch panels)
3. Power/Signal LED: When there is power and no HDMI source signal, the indicator will flash; when there is
power and a source HDMI signal, the indicator will emit solid blue
4. DC 12V Port: No power supply needed, splitter will provide power over Cat6 (PoE) to the receiver units
5. S/PDIF OUT: Digital Optical Audio break out that will output source signal audio; connect to an external
amplifier, soundbar, and/or audio distribution component
6. HDMI OUT: Connect a display such as an HDTV or HD Projector
7. IR IN: Connect the included IR Receiver (RX); see IR section for setup
8. IR OUT: Connect the included IR Blaster (TX); see IR section for setup
1
2
3
4
PANEL DESCRIPTIONS
5
6
7
8
EV4K7014 Receiver
Summary of Contents for Evolution EV4K7014
Page 15: ...800 626 6445 15 ...