www.vanco1.com
800.626.6445
8
IR PASS-THROUGH
IR Blaster TX
IR Receiver RX
IR BLASTER (TX)
To control the source: Plug IR Blaster into IR TX port of transmitter unit (EVEX2004-TX);
place blaster in front of the IR eye of the source.
To control the display: Plug IR Blaster into IR TX port of receiver unit (EVEX2004-RX); place
blaster in front of the IR eye of the display.
IR RECEIVER (RX)
To control the source: Plug IR Receiver into IR RX port of receiver unit (EVEX2004-RX);
place receiver at or near display.
To control the display: Plug IR Receiver into IR RX port of transmitter unit (EVEX2004-TX);
place receiver in position where it is able to receive remote signals.
IR Blaster TX
IR Receiver RX
1.
IR Signal
2.
Grounding
1.
IR Signal 20-60 kHz)
2.
Grounding
3. Power
