2
Introduction
Speaker Wire
Congratulations and thank you for purchasing Beale Basics Series speakers
from Beale Street Audio!
Beale Basics In-Ceiling speakers install with ease using the ‘dog’ mounting
system and magnetic grilles for fast, clean installations.
Please follow the instructions in this manual to assure proper installation
and to achieve the full performance and satisfaction you would expect from
Beale Street Audio.
For the IC6V-BSC and IC8V-BSC, pull one run of speaker wire from the
amplifier location to each speaker location OR pull one run of speaker wire
to the FIRST speaker. Able to daisy chain out to the other speakers running
in parallel.
If in pre-wire, while the walls are open and it’s easy, pull extra wire to any
location that may be desirable to add speakers later. Leave extra length
of wire on each end to allow making connections and installing/removing
speakers. We recommend a minimum of 18 AWG cable for 70/100 volt
systems.
New Construction
Beale Street Audio speaker installation can be simplified by using Beale
Street Audio new pre-construction brackets (sold separately; visit www.
getbeale.com for additional information).
TB65 and PRECB65: Use for IC6V-BSC
TB80 and PRECB80: Use for IC8V-BSC
These are installed prior to drywall installation and allows for precise
speaker placement and simplifies the final installation of the speaker.
