www.vanco1.com
800-626-6445
11
CONNECT AND OPERATE
1. Connect a single source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver,
etc. to the HDMI input on the splitter.
2. Connect the HDMI displays to the output HDMI ports, using a high-definition display such as an HDTV
or HD projector that has HDMI inputs. Note that high-speed HDMI cables are recommended for the
distances that are required for each connection.
3. For power, plug in the source first, followed by the splitter (power supply included), followed by the output
displays connected.
4. Power on each device in the same sequence.
At this point each display connected should display the source that is connected, ensure each display is
displaying A/V signals and verify everything is in working order. If a display is having difficulty receiving a
signal, access the display’s menu and adjust the resolution (lowest to highest until signal is displayed). A 24
Hz vertical refresh rate may work better than 60 Hz or higher. If the IR remote function is not responding,
check the emitters to ensure they are placed correctly and are plugged into the IR jack correctly on the
splitter.
HDTV
HDMI
Front
Back
IR Transmitter
IR Receiver
Single Input Source
IR Adapter allows for
IR Control over any
existing HDMI Cable
HDTV
Forward and
Backward Compatible
IR Channel Control
280702 CONNECTION DIAGRAM
