Vanco 280626 User Manual Download Page 3

www.vanco1.com

 800-626-6445

3

FEATURES

The Vanco 280626 HDMI Extender over Single Cat5e/6 featuring HDBaseT 5-playTechnology 

extends HD audio and video, ethernet, bi-directional IR, RS-232, and Power over Ethernet (PoE) 

at a distance of up to 330ft/100m over a single Cat5e/6 cable.  This set is also capable of 4K2K 

(2160p @ 24/30hz) resolution and up to a range of 230ft/70m.  HDBaseT Technology allows 

for greater bandwidth and transmission range compared to standard HDMI extenders.  Power 

over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing for either Transmitter 

or Receiver to be powered without the use of a power supply.  The result is an easy and flexible 

installation with low maintenance. Capable of deep color video, DTS-HD or Dolby TrueHD audio, 

and compliance with HDCP standards, the 280626 is a great solution. 

HDBaseT Extender (330 ft/100m)

Part # 280626

• 

Features HDBaseT Technology, optimized 
for whole-home or commercial distribution 
of uncompressed high-definition signals at 
twice the distance of HDMI cables without 
degradation

• 

HDBaseT Extender can connect uncompressed 
full HD digital video, audio, IR, 100BaseT 
Ethernet, and various control signals via RS-
232 through a single 330ft/100m Cat5e/Cat6 
cable

• 

Features Power Over Ethernet (PoE), integrates 
power into the Cat5e/6 cable, requiring no 
power supply for either the Transmitting unit or 
Receiving unit (opposite of unit that is plugged 
in to power)

• 

4K2K (2160p @30hz) resolution compatible

• 

HDBaseT Technology that supports HDMI Deep 
Color, 3D, and up to 4K2K resolution @ 30hZ

• 

Transmission Range: Extends 1080p 
resolutions up to 330ft (100m) over a single 

Cat5e/6 cable and 2160p/30hZ (4K2K) 
resolutions up to 230ft (70m)

• 

HDCP Compliant

• 

EDID pass through  

• 

CEC support

• 

Auto equalization

• 

Pure unaltered uncompressed 7.1ch digital 
HDMI over Cat.5/5e/6 cable transmission

• 

DTS-HD Master Audio and Dolby TrueHD high 
bit rate audio support

• 

Wideband IR signal from 20KHz to 60KHz 

• 

Bi-directional IR pass-through

• 

Wall mountable housing design for a quick and 
easy installation

• 

Dimensions: 4.2” (107mm) W x 1” (27mm) H x 
4.2” (107mm) D

Summary of Contents for 280626













Reviews: