VERA-LIFT
TM
Back Belt, Sitting Sling, and Gait Belt
Ordering Information
VERA-LIFT
TM
Back Belts
Sizing
The VERA-LIFT™ back belt should be wide enough to fit from the top of the gluteal fold
(between the buttocks) to 2 – 3 inches below the lower edge of the patient’s shoulder
blades. The back belt should be long enough for belt fabric to fit around the patient's
abdomen without loop fabric touching the patient.
Material
Back belt and sitting slings are available in your choice of standard polyester, high-heat
polyester (which withstands temperatures up to 200
°
). You may also choose cool-heat
polyester (which withstands temperatures up to 167
°
) and has a non-absorbent coating on
one side for easy spot cleaning.
Double Strap Contour Back Belts
(For Skilled Nursing and Long Term Care Facilities)
Double strap back belts can be used with the white straps
connected to the lift arm hooks to transfer patients with
predictable, cooperative behavior who meet the other single
strap connection criteria. Patients with cooperative but
unpredictable behavior, patients with one-sided weakness and
patients with a single lower amputation can be safely
transferred with the white straps crossed and the colored
straps connected straight to the lift arm hooks. (Refer to
“Patient Assessment Criteria” and “VERA-LIFT™ Transfer
Procedures” for specific information.)
10-Inch Wide Contour Back Belt
Size Length
Part Number
Small
35 inches long
5-091020
Medium
40 inches long
5-092020
Large
46 inches long
5-093020
Ex-large
62 inches long
5-094020
13-Inch Wide Contour Back Belt
Size Length
Part Number
Small
35 inches long
5-091023
Medium
40 inches long
5-092023
Large
46 inches long
5-093023
Ex-large
62 inches long
5-094023
November 2017
For your nearest distributor, call 1-800-694-4525
25