manualshive.com logo in svg

Vanatoo TRANSPARENT ONE ENCORE, Owner'S Manual, Page: 6 / 13

Share
Download
Vanatoo TRANSPARENT ONE ENCORE Owner'S Manual Download Page 6

www.vanatoo.com   6

SETTING UP YOUR SYSTEM, CONTINUED 

Step 1: Connect the active speaker to the passive speaker

Theincludedspeakerwiththemodular4conductorconnectorsmakesthis

connectionsimpleandquick.

Step 2: Connect the active speaker to the power outlet 

1.  Makesurethepowerswitch(4)isinthe

OFF

position.

2.  PlugtheACpowercordintothepoweroutlet.

Step 3: Connect the active speaker to your audio device

1.  Turnthevolumecontrol(1)onthespeakerandaudiodevicedowntominimum.
2.  Findthecorrectinputconnectorforyouraudiodeviceontheactivespeaker

backpanel(7,11,12,or13).Connectthedeviceusingtheappropriatecableand

turniton.

 

3.  Turnthepowerswitchtothe

ON

position(4).TheblueLED(9)willlightupwithin

5secondstoindicatepowertotheunit.

TIP

Ifyouareusingawirelessnetworkdevice,orconnectingtoacomputerusingthe

USBport,theremaybeadditionalsetupnecessaryonyouraudiosource.Consult

thedevicemanufacturerforsetupinstructions.

TIP

Whileaddingorremovingcableswiththepoweronwon’tdamageyourspeakers,

werecommendthatyouturnthemofffirst.

Step 4: Optimize for your space

Vanatooknowseachcustomer’senvironmentandlisteningpreferencesaredifferent.

TransparentOneEncorespeakershavebass,treble,andvolumeadjustments,and

allowyoutochoosewhethertheactivespeakerisintheleftorrightposition.

1.  LocatetheL–Rswitch(10)onthebackoftheactivespeaker.
2.  Settheswitchtodesignatewhethertheactivespeakeristhespeakeronyour

left(L)orright(R)whenyouarefacingbothofthespeakersfromthefront.

3.  Turntheaudiosourcedevicevolumeupto¾tofull.
4.  Turntheactivespeakervolumeknob(1)uptothemaximumvolumeyoudesire.
5.  Thisshouldprovideagoodvolumecombinationsothat,inthefuture,you

shouldonlyneedtoadjustthevolumecontrolonyouraudiodevicetoachieve

yourdesiredlisteningvolume.Adjustthevolumecombinationdownifyour

settingscausedistortion.Aswithallspeakers,prolongeddistortioncancause

permanentdamage.

6.  Rotatethetreble(2)andbass(3)controlstoadjustthetoneasdesired.Inmost

cases,theoptimumsettingforaflatfrequencyresponseistosetthetrebleand

bassknobsatthedetents(straightupposition).Thisisourdefaultsetting.

Step 5: Enjoy! 

That’sIt!YouarereadytoenjoyyourVanatooTransparentOneEncorespeakers.

Congratulationsandhappylistening.

Summary of Contents for TRANSPARENT ONE ENCORE














Reviews:

No comments