7
8
9
Listen to Music!
Remote Control
Optional Settings
Turn the power switch to the
ON
position (2). The blue LED (8) will light up within
5 seconds to indicate power to the unit. In most applications you can set the T1E Plus
volume control to 100% and adjust the volume up/down from your source (Computer,
Bluetooth device, etc).
The included IR Remote Control is especially handy when your T1E Plus is used with a
TV, or for switching sources, adjusting bass and treble, etc. Note that you must hit the
“Enable” button to enable the other buttons inside the rectangular box for 15 seconds.
The T1E Plus has a lot of setup options, such as enabling the speakers to play
mono, disabling sleep mode, varying the LED brightness, connecting a subwoofer
and alternate bass profiles for room placement. Go to www.vanatoo.com/
support/downloads to download the user manual for a full description of the
T1E Plus and its setup options.
CONGRATULATIONS!! That’s it! We hope you enjoy your
Vanatoo Transparent One Encore
Plus
powered speakers.
For additional setup up information, connectivity options, and the troubleshooting
guide, check out the Transparent One Encore Plus Owner’s Guide or visit us at
www.vanatoo.com.
Contact Us
Email: [email protected]
Copyright 2023 Vanatoo LLC, all rights reserved
“Vanatoo” is a registered trademark, “Vanatoo Technology Serving Art” logo and “Transparent One Encore Plus” are trademarks of Vanatoo LLC
5
Designate Left-Right speaker
Set the Left–Right switch (9) to designate whether the active
speaker is located to your right or left (as you face the speakers).
This ensures the music is recreated as it was recorded.
6
Install the Grills
Grills come in individual plastic bags. Simple magnetic mounting (no or little alignment
necessary). Can go either way such that the “Vanatoo” logo is upright on the bottom.
