SECTION 6: MAINTENANCE
AIR N ARC
®
300 SERIES ALL-IN-ONE POWER SYSTEM
®
PAGE - 70
090010-OP_r0
KEY
DESCRIPTION
A
COMPRESSOR OIL FILL PORT
B
COMPRESSOR OIL FILL CAP/DIPSTICK
C
OPTIMAL OIL LEVEL RANGE INDICATION IS BETWEEN HOLES AT THE END OF THE COMPRES-
SOR FILL DIPSTICK
Figure 6-4: Compressor Oil Fill Location and Level Check
A
B
C
6. Add oil as needed, but
DO NOT
overfill.
7. Replace oil fill cap/dipstick [
B
] and tighten.
6.5.4 REPLACING THE COMPRESSOR OIL FILTER
ELEMENT
The compressor oil filter element is a spin-on disposable
type. Consult
Figure 6-5
,
and the following procedure to
change the compressor oil filter element. Consult
Section 6.3, Maintenance Schedule Table
for routine
compressor oil element change intervals.
TOOLS/ITEMS NEEDED
REPLACEMENT
PART(S)
Strap Wrench
Oil Filter Element
No. 266801
Compressor Oil (enough to
coat seal ring, and
possibly for a top-off to the
proper level)
