IN8182 - PAGE 2 OF 5
1
Loosely secure the top middle bracket (ME0961 / BRACKET 4) to the top half of
the top bulkhead using M6x14 hex bolts (FX4061), M6 washers (FX4017) and M6
flange nuts (FX4016).
Remove the vehicles ply lined wheel arch covers (if fitted). The covers can be
re-fitted once the bulkhead has been fully fitted. Please note that it will be
necessary to trim the wheel arch covers for the bulkhead to fit.
2
3
Assemble the top and bottom sections together (inside the vehicle) using M6x16
coach bolts (FX4042), M8 washers (FX4020) and M6 flange nuts (FX4016).
4
Please read the important notes on page 1 before fitting this product.
LOOKING AT BULKHEAD
FROM CAB AREA
BOTTOM
TOP
CAB SIDE
LOAD SIDE
