Van Der Stahl OPL Series, Operating Instructions Manual

Page: 28 / 60

OPL (USA) Series Operating Instructions Ver. 3.02E
28
Before replacing parts
When replacing parts, lift up the pressure lever for
easier replacement.
How to lift up the pressure lever
Turn the pressure adjusting nut at the center of the
pressure lever fully counterclockwise, and remove the
pressure adjusting nut. Lift up the pressure lever. For
the installment method, please refer to
Attention
of
³6HDOLQJSUHVVXUHDGMXVWPHQWPHWKRG´ĺSDJH
25)
.
10-1 Preparation for parts replacement
Pressure adjusting nut
Small lever
Pressure rubber
Pressure lever
Sliding shaft
Warning
When the pressure lever is lifted up, you
can activate the microswitch by clicking it
with a thin stick, etc. Do not activate the
microswitch as it will start heating and may
result in fire if the plug is not unplugged.
Please refer to warning of
“10-7 Pressure
UXEEHUUHSODFHPHQW´ĺSDJH34).