![background image](http://html1.mh-extra.com/html/vamoose/fs-super-odin/fs-super-odin_owners-manual_3319089013.webp)
13
Fig. 3: Front Wheel
Install Front Wheel
• Most deliveries of the ODIN
electric cycles will arrive with
the front wheel mounted.
• In the rare case that it does not
come attached, put the front
wheel in the middle of the front
fork.
• Make sure the brake disc is
placed in the center of the
caliper gap and the front wheel
can rotate freely without any
noise. When the brake disc is
not in the gap, DO NOT pull the
Fig. 2: Headlight
Install Headlight
•
The SUPER ODIN headlight won't come
installed, however, installation can be
done easily.
•
You can adjust the height and angle by
loosening the bolt and nut, making the
adjustment and then fastening the bolt
back.
•
Connect the light power cable by
connecting the cables identified with green
colour ends.
brake lever.
•
Install the front wheel and tighten the nuts provided. If your cycle
has a quick release, adjust and close tightly.
•
The fasten torque of the front wheel should be no less than 35-40
N.m. (no less than 35-40 N.m. for the rear wheel as well).
Headlight
Frame
Summary of Contents for FS SUPER ODIN
