Valve INDEX, Safety, Maintenance & Warranty

Page: 10 / 76

REGULATORY INFORMATION
FEDERAL COMMUNICATION AND INDUSTRY CANADA (IC)
Valve Headset FCC ID: 2AES41007 / IC ID: 20207 -1007
Valve Left Controller FCC ID: 2AES41005 / IC ID: 20207 -1005
Valve Right Controller FCC ID: 2AES41006 / IC ID: 20207 -1006
Base Station FCC ID: 2AES41004 / IC ID: 20207 -1004
COMPLIANCE STATEMENT
This equipment is tested to comply with FCC (Federal Communication Commission)
Standards. For home and office use. Not intended for use in machinery, medical, or industrial
applications. This device is for use with NRTL- listed (UL, CSA, ETL etc.) and/or IEC/EN 60950
compliant (CE marked) IT equipment. No serviceable parts included.
This device complies with Part 15 of the FCC Rules. This device complies with Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any inter-
ference received, including interference that may cause undesired operation.
The equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna and increase the distance between the
equipment and the receiver.
2. Connect the equipment to outlet on a circuit different from that to which the receiver is
connected.
3. Consult an experienced radio/TV technician for help.
CAUTION:
The FCC requires that you be notified that any changes or modifications to the
Hardware not expressly approved by the manufacturer could void the user’s authority to
operate the equipment.
NOTE:
The Base Stations should be installed and operated with a minimum distance of 20 cm
between the Base Stations and any person to comply with RF exposure guidelines.